DAILY MAINTENANCE
5
MAINTENANCE
Be sure the unit is switched off and
unplugged before cleaning. Wear
protective gloves when cleaning the
inside of the chamber and when
changing blades. Do not touch the
blade tip directly.
Lower the blade below the conical case
surface when cleaning the inside of the
chamber. Wipe the shaving table
counterclockwise (against the blade tip
direction).
Do not immerse the unit in water. This
could cause an electrical short circuit,
rust, or permanent damage to the unit.
WARNING
Do not touch the power switch, plug, or
other electric parts with wet hands.
Remarks
●
Inside Ice Shaving Chamber (including the shaving
table, slide cover etc.):
1) Turn the blade adjustment knob completely
clockwise to lower the blade behind the surface of
the shaving table. With the blade above the
shaving table, it could injure your fingers.
2) Turn the slide cover counterclockwise to open it.
3) Clean the shaving table using a damp cloth in a
counterclockwise direction. Do not clean in a
clockwise direction; this could cause injury
inflicted by the blade.
4) Clean the inside of the slide cover using a damp
・
Do not use water over 40
°
Celsius when cleaning.
This could cause the plastic parts to become
distorted.
・
Do not use the followings on plastic parts: benzine,
alcohol, petroleum, powdered soap, polishing
powder, alkaline detergent, acid, hypochlorous
acid, scrub brushes, etc. When a chemical cloth is
used for this machine, follow the instruction
manual of the chemical cloth.