TROUBLE SHOOTING
TRANSFER AND DISPOSAL
The machine does not
start.
Problems
Things To Check
What To Do
The machine works, but
does not shave ice well.
Ice moves away from the
ice holder during shaving.
Is the plug connected to the socket?
Is the protector working?
Is the belt mounted properly?
Is the slide cover (shaving shield)
open?
Is the motor loaded heavily?
Is the blade dull?
Is the blade adjusted properly?
Is the tension bolt loose?
Is the tension too loose?
Do the prongs of the ice holder not
catch the ice?
Connect to the socket.
See page 11 - About the Protector.
Contact the distributor.
Close the slide cover (shaving shield)
completely.
Switch OFF. Remove the cause.
Replace the blades (see Page 12).
Turn the blade adjustment knob
clockwise to raise the blade.
Turn the bolt clockwise for increased tension.
Turn the tension adjustment bolt clockwise.
Drop the ice holder a bit more so the prongs
grip the ice firmly.
●
When selling or transferring this product to a third
person, tape this instruction manual to the machine.
This will ensure the new owner has all the instructions.
●
Refer to a qualified service or your local dealer when
discarding the product. Abandoned products are
dangerous and can result in injury. Blades are
dangerous and require proper disposal.
●
The machine should be serviced by the distributor or an authorized mechanic.