9. SETTING FUNCTION OF TRANSMITTER BUTTONS
a) Press and hold the
SET
button until the display shows "1", then press the
UP
button until the display shows "9".
b) Press the
SET
button again. The device is now in the button recognition
function setting mode. The display will show the number "1" with a flashing dot.
c) Press
UP / DOWN
button once to select whether you want all 4 buttons to
control only one drive, or only one coded button can control the drive.
The number "0" means that the button recognition function is closed. It
means that if you coded 1 button with 1 drive, then all 4 buttons on the
remote control can control the drive. This solution is good for users who
only have 1 home automation gateway.
The number "1" means that the button recognition function is open. If you
encoded the first button with the first drive, the first button will be the only
button on the remote that can control the drive. It is suitable for users who
have more than 1 automatic gate at home.
d) Press the
SET
button to confirm the setting, then the drive will return to
standby automatically and display "ll".
ATTENTION!
1. The button recognition is by default set to "1".
2. After changing the button recognition settings, remember that only a
hard-coded button can control the drive. The function is inoperative if the
gate is set to partially open.
17
Summary of Contents for 300 SILENT 1000N
Page 28: ...DISTRIBUTOR 28...
