2. SETTING THE DRIVE FORCE
ATTENTION! The adjustment of the force of reaction to an obstacle
is set automatically during programming. Usually, no
customization is necessary.
a) Press and hold the
SET
button, the display shows "1", then press the
UP
button, the display shows "2", when the button is released.
b) Press the
SET
button again, the device is now in force adjustment
mode. The display will show "3" with a dot
c) Press the
UP
button to increase the force setting or
DOWN
button to
decrease the force setting.
The minimum force is "1" and the maximum force is "5".
d) Press the
SET
button to confirm the settings, then the drive will return
to ready state and display "ll".
ATTENTION! The force default is set to "3".
.
12
Summary of Contents for 300 SILENT 1000N
Page 28: ...DISTRIBUTOR 28...
