17
4. Grip the lower edge of the magnifier plate (through the underside of the hood), and
pull firmly.
5. Keep the plate holder halfway down and insert the replacement lens plate with the
printed side up. Fold the hood down and replace on the camera.
Changing the focusing screen 3
1. Detach the magazine and viewfinder.
2. Push the two screen clips to the side into their recesses.
3. Place your hand over the screen, and invert the camera. The screen will now drop
into your hand.
4. Insert the replacement screen, ensuring that the smooth flat side is uppermost and
the sharp-edged corners down. Ensure that all four corners of the screen are posi-
tively seated on their supports.
You need not return the screen latches. This is done automatically when the viewfinder
is replaced.
Should the screen refuse to drop out by itself, ensure that the camera is fully wound,
remove the lens and check that the mirror is in the down position. Put a finger through
the lens mount and push gently on the screen from underneath, preferably with a soft
cloth between the screen and the finger.
Do not immerse the screen in water, or use any kind of cleaning fluid.
Do not use hot air to dry the screen if it becomes damp.
3
