--13--
OPERATING THE MACHINE
MITRING WITH THE MITRE
FENCE
1 Turn the rotating table in such a position
that the saw-blade is square to the fence
and block the table with the knob
underneath the table top.
2 Put the saw-blade in the highest
position.
3 Put the material on the machine.
4 Push the wood against te fence.
5 Check if the wood does not touch the
saw-blade when starting the motor.
Notice: Support the wood properly.
6 Switch on the motor.
7 Move the fence and the wood forward at
a constant speed and cut the material
(fig. 11(.
8 Remove the material after the saw-blade
has stopped.
Notice: If the saw-blade stops because of
clamping of the wood, switch off the motor.
Hold the piece of wood tightly.
Notice: Never stand in the line of the saw-
blade. In case of a return shock you might
get hit.
