--18--
MALFUNCTIONS
SAFETY
Disconnect the machine of the mains
supply before adjusting the machine or
removing malfunctions.
See to it that all damaged parts are
replaced before operating the machine.
MALFUNCTION:
- STOPS OF ANGLE ADJUSTMENT OF
THE SAW-BLADE FOR CUTTING AT 0º
& 90º ARE OUT OF ADJUSTMENT.
ADJUSTING STOP 0º
1 Put the saw-blade in the highest
position.
2 Adjust the saw-blade with a square.
3 Loosen the counter nut of the bolt and
4 Block the bolt with the counter nut.
5 Check the adjustment.
AJUSTING STOP 45º
1 Put the saw-blade in the highest
position.
2 Adjust the saw-blade with a square
3 Loosen the counter nut of the bolt
and adjust it against the stop (fig. 20).
4 Block the bolt with the counter nut.
5 Check the adjustment.
