--14--
OPERATING THE MACHINE
CUTTING AT AN ANGLE WITH
THE HEIGHT ADJUSTMENT
1 Put the saw-blade in the lowest position.
2 Turn the rotating table in such a position
that the saw-blade is square to the fence
and block the table with the knob.
3 Position the fence in such a way that the
wood is placed in the center of the saw-
blade.
4 Block the fence.
5 Push the material with the right hand
against the fence..
Notice: Support the material to be cut and
already cut properly.
6 Switch on the motor.
7 Move the saw-blade slowly and with a
constant speed upwards by means of the
lever (fig. 12)
8 If the material is cut lower the saw-blade
under the table top by means of the
lever.
9 Switch off the motor.
10 Remove the material.
CUTTING AT DIFFERENT ANGLES
B.M.O. THE HEIGHT
ADJUSTMENT
1 Put the saw-blade in the lowest position.
2 Adjust the rotating table at the proper
angle towards the fence. Angle scale
engraved in table top.l
3 Position the fence in such a way that the
wood is placed in the centre of the saw-
blade (fig. 13).
4 Block the fence.
5 Push the material with the right hand
against the fence.
Notice: Support the material to be cut and
already cut properly.
6 Switch on the motor.
7 Move the saw-blade slowly and with a
constant speed upwards by means of
the lever (fig. 12).
8 If the material is cut lower the saw-
blade under the table top by means of
the lever.
9 Switch off the motor.
10 Remove the material.
Notice: Saw-blade may not touch
aluminium sub-fence.