--15--
PUTTING SAW-BLADE AT AN
ANGLE
1 Adjust the right angle b.m.o. the handle
and the knob at the bottom of the
machine (fig. 14).
2 Check the angle adjustment with a
bevel. (90 E and 45E
are fixed stops).
3 Block the angle
adjustment with the
knob.
Notice: Support the
material to be cut and
already cut properly.
Notice: Adjust the sub-
fence in such a way that
it cannot touch the saw-
blade.
Notice: Use a pushing
stick when cutting small
wood.
Notice: If the saw-blade stops because of
clamping of the wood, switch off the motor.
Hold the piece of wood tightly.
Notice: Never stand in the line of the saw-
blade. In case of a return shock you might
get hit.
