--16--
MALFUNCTIONS
SAFETY
Disconnect the machine of the mains
supply before adjusting the machine or
removing malfunctions.
See to it that all damagerd parts are
replaced before operating the machine.
MALFUNCTION:
-STOPS FOR CUTTING 90º AND 45º ARE
OUT OF ADJUSTMENT.
ADJUSTING THE TURN TABLE
ADJUSTING STOPS 0-90º
1 The table top is marked.
2 Rotate the turntable in such a way that
90º exactly aligns with the notch in the
top (fig. 15).
3 Adjust the bolt with the counter nut at
the stop (fig. 16).
4 Check the adjustment.
5 lmmediately adjust the sub-fence.
(see chapter checking
malfunctions, adjusting sub-fence.
6 Block the sub-fence.
7 Put a square against the sub-fence
langsgeleider
8 Adjust the saw-blade b.m.o. the turn
table against the square.
9 Adjust the bolt with the counter nut at
the stop.
10 check the adjustment.
