--11--
ADJUSTING THE RIVING KNIFE
Security
Check the thickness and dimensions of the
riving knife. The riving knife has to be
thicker than the mother blade but thinner
that the teeth of the saw-blade.
1 Disconnect the machine.
2 Put the saw-blade in the highest
position.
3 Open the lid of the saw-guard.
4 Slightly loosen the nut of the riving
knife.
5 Adjust the riving knife in such a way that
the distance of the inner circle and the
teeth of the saw-blade which rise above
the table top, is max. 3 mm. The highest
point of the riving knife has to be 3 to 5
mm below the highest point of the saw-
teeth (fig. 7).
6 Tighten the nut of the riving knife firmly
7 Close the lid of the saw-guard..
8 Connect to the mains supply.
