8
Assembling and Adjustment
Warning: The lathe must be powered off during assembly, adjustment or
maintenance.
Base
A level concrete floor is the best location for the lathe. The lathe should be located in a dry
area. Keep the electrical box and motor away from direct sunshine. Plenty of space around
the lathe is good for operations and maintenance.
Unpacking
Report any damage to your shipping agent or dealer immediately as soon as the unit has
been checked for shipping damage.
Check the shipping crate with the following parts list to make sure all parts are intact. If
there are any missing parts please report it immediately to your dealer. Read this manual
thoroughly for assembly, maintenance, operation and safety instructions.
Shipping Contents
Fig. 1
A
Lathe bed with Headstock, Tailstock,
Tool Rest Base (Banjo)
，
Tool Rest
Q
12” Swing away Extension Bed x 1
B
Leg Assemblies x 2
L
12mm Spring Washer x 2
C
Knock Out Rod x 1
M
12mm Flat Washer x 2
D
Face Plate Wrench x 1
N
Tool Kits x 1
E
Locating Rod x 1
O
Levelers x 4
G
Live Center x 1
P
3” Face Plate x 1
H
Spur Center x 1
R
M12×40 Bolt x 8
I
10mm Hex Wrench x 1
S
Operation Manual x 1
J
3mm Hex Wrench x
K
M12×20 Bolt x 2
T
Spindle Guard
U
Support Bracket
V
Rear Support Bracket
W
Profiling Center
X
Profiling Center
