7
Specifications
Models
T-60S
Operation Information
Swing Over Bed
24”
Dist. Between Centers
48”
Swing Over Tool Rest Base
20”
Spindle Speeds: High Range
200-3500rpm(Variable)
Low Range
60-1000rpm (Variable)
Floor to Spindle Center Height
44” (NO Leveler )
Headstock Travel
Full Length
Max. Outboard Turning Swing
34”
Spindle
Spindle Taper
MT#2
Spindle Size
1-1/4x8(RH)TPI
Spindle Bore
5/8”
Spindle Index#
48
Spindle Bearing
2x6209 Front, 1x6208 Rear
Tailstock
Tailstock Taper
MT#2
Hole through Tailstock
3 /8”
Tailstock Quill Travel
4-1/2”
Swing Away
Standard
Accessories
Tool Rest Width
14”
Face Plate
3”
Swing away Bed Length
12”
Spur Center
MT#2
Live Center
MT#2
Extension Bed
20”
Electrical And Motor Information
Motor Type
AC Induction
Motor Power
3HP
Speed
180-3180rpm
Power Requirement
200-240V/single phase
Power Supply
Warning: For your own safety, have all electrical installations performed under the
supervision of a qualified electrician.
Caution: If the factory installed plug does not fit the outlet, before making any
changes, please seek assistance from a qualified electrician to ensure that the
electrical supply meets local standards.
.
Warning
:
The machine must be connected with three phase and five wire power
supply, otherwise there may be no speed display on the screen.
Voltage:
220V/240V
Frequency:
50/60Hz
Phase:
Single Phase
Current:
10.3A
