13
Operation
Notice:
The lathe must be powered off during assembly, adjustment or maintenance.
Please start the lathe by using the lowest speed!
Control Panel
Refer to Fig. 10
Fig.10
1. Emergency Stop Button ---Button A:
2. Start/Stop Button ---Button B:
Turns the lathe ON or OFF.
3. Positions Switch ---Gear Switch C:
“F”: forward; “R”: reverse; “O”: stop
4.Speed Adjustment Knob ---D: .
Change the spindle speed by turning this knob.
Note:
If a sudden power failure occurs, the spindle will not re-start automatically when the
power is restored. Turn the Switch C to “O”, then press the button B to reset, and then turn
Switch C to F (forward) or R (reverse).
A
B
D
C
