10
Comparator Brackets
(Refer to Fig.4)
Mount the front comparator bracket (C) to the back of the headstock with two M12 socket
head cap screws (D). This bracket can be also used for mounting the spindle shield.
Mount the rear comparator bracket (A) to the back of the tailstock. The bracket has a slot
so it can be aligned with the front comparator bracket. Use two M12 head cap screws (B) to
secure the rear comparator bracket to the tailstock.
Fig. 4
Spindle Shield
(Refer to Fig. 5)
1. Lift up the spring pin (B) and insert the support rod (A) into the bracket hole. Release the
spring pin, slide the rod and you will feel that the spring pin snaps into position.
2.Install the outer collar (C) and tighten the set screw (D).
Fig. 5
A
C
B
D
D
C
B
A
