6
Installation and Routing Wire Harnesses and Baler Interface Harness
Route harnesses along inside of the
baler (Left). Keep harnesses away from
moving parts and hydraulic hoses.
Secure with existing cable clamps or use
cable ties.
When all connections are made to the
DCP secure wires as shown above to
allow for water to be shed away from the
DCP.
Locate and remove the Active
Terminator (below left) of baler. Attach
Baler Interface Harness (006-6650VA) to
that location. Reconnect Active
Terminator (below) to open port of that
same harness (006-6650VA)