8
Connecting Star Wheels to the DCP
600BB
Locate the moisture harness 006-7303HL. Remove the pan head
screws on each star wheel and remove the star wheel cover.
Loosen the black grommet.
Insert the eye loop of the wire into the star wheel block through the
grommet and install on the end of the swivel. Leave a loop in the
wire to allow the star wheel cover space to be reinstalled.
Tighten the swivel nut, followed by the grommet, and finally install
and tighten the four screws. Once both wheels are complete, route
the harness towards the DCP and secure loose wires with cable ties
after the star wheels are installed on the baler in the next step.
600BBHD
Locate the moisture harness 006-7303HX. Remove the pan head screws on each star wheel and remove the
star wheel cover. Loosen the black grommet.
Insert the eye loop of the wire into the star wheel block through the grommet and install on the end of the
swivel. Leave a loop in the wire to allow the star wheel cover space to be reinstalled.
Tighten the swivel nut, followed by the grommet, and finally install and tighten the four screws. Once both
wheels are complete, route the harness towards the DCP and secure loose wires with cable ties after the star
wheels are installed on the baler in the next step.
030-4641
Star Wheel Cover
Grommet
Grommet
Star Wheel Cover
030-4641U