4
Introduction
Thank you for purchasing this 600BB or 600BBHD Moisture Sensor Kit. The Moisture Sensor Kit is designed to
operator through the
baler’s ISOBUS system and/or an Apple iPad (not included) using the Hay App. The
moisture sensor offers these advantages:
1. Operation coordinated with baler operation
2. Less cab clutter providing better visibility
3. Ease of use with all information on one screen
4. Records kept together
5. The system is ready for future updates
This manual will take you through the steps of installing the moisture sensor. Please read this manual carefully
to learn how to install the equipment correctly. Failure to do this can result in personal injury or equipment
malfunction. If you are unsure about installing the system after consulting this manual, contact your local
authorized dealership for additional assistance or look for the contact information on the back cover of this
manual. If you are in need of parts for the system please view the Parts Breakdowns in the back of this manual
and contact your local authorized dealer to order the parts.
Right and Left sides are determined by facing in the direction of forward travel.
System Requirements
The Baler Control Module (BCM)
must have Version 4.2.0.0 or higher.
*Made for iPad
®
(3
rd
through Pro 2
nd
generation), running the current iOS operating system
or one version previous required for iPad option
*iPad is a trademark of Apple Inc., registered in the U.S. and other countries.
**600 Series Applicators with serial number before DCP27000 will require the DCP to be sent to Harvest
Tec for a required update in order to use the iPad Integration Module (030-6672C).
*Hay App version must be
at least
2.7.1 (or higher)
to operate with the iPad Integration Module
In order for the CNH Baler to receive the messages regarding Status, Moisture and display this information on
the Baler Work Screen, the software in the Baler Control Module (BCM) needs to be updated to version 4.2.0.0
or higher. Dealers can log an ASIST incident and request the BCM software from CNH Technical Support
Services if they need the software prior to those release dates.
Tools Needed
Standard Wrench set
Electric drill and bits
Side cutter
Standard Socket Set
Hammer
Center punch