![background image](http://html1.mh-extra.com/html/harvest-tec/300rb/300rb_operation-manual_2103705019.webp)
19
Wiring Diagram
– 300RBC
1. Connect the power harness (006-3650T) to the tractor battery (12 volt) using the red wire with fuse to the
positive side and the black wire to the negative.
a. The power harness must be connected to the battery!
The unit will draw more amps than
convenience outlets can handle. Any modifications of the power harness will void systems
warranty.
CONTACT HARVEST TEC BEFORE MODIFICATIONS.
b. This unit will not function on positive ground tractors.
c. If the unit loses power while operating it will not keep track of accumulated pounds of
product used.
2. The power harness on the tractor (006-3650T) will run from the tractor battery to the hitch. The power
harness on the baler (006-3650B1) will connect to the tractor power harness (006-3650T) at the hitch.
3.
Connect the keyed power wire (006-5650K) to a keyed power source on the tractor.
The keyed power
wire must connect to a keyed source or the unit will not power up correctly.
4.
Attached the iPad Integration Control (030-6672C) to the tractor power harness (006-3650T).
5. Attach the End of Bale (EOB) connection on the controller to the End of Baler Sensor (006-7400).
System wiring diagram
Power Harness on Tractor
006-3650T
300 Control Box
006-3671RB
Moisture Harness
006-4640GX2
Moisture Content (MC%)
End of Bale Sensor
006-7400
iPad Integration Control
030-6672C
Orange Wires to
Keyed Power
006-5650K
Power/ Harness on Baler
006-3650B1
Harness
Color
EOB
Brown
V1
White (Delphi Connector)
EOR
Yellow
FLOW
White
V2-DSM
White (Delphi Connector)
Pump
Orange
Moisture Disc
006-4641HX (x2)
Summary of Contents for 300RB
Page 2: ...2 intentionally blank ...