15
Operation Instructions
Automatic mode will allow you to view the moisture information and baling rate.
Automatic Mode
After pushing the AUTOMATIC MODE key in the Main Menu screen, the following screen will appear:
iPad
1. To pause the unit while in operation select the Pause key.
2. Push the OVERRIDE key to turn on the pump for full output of the system. This button is not used with
a moisture only system.
3. The moisture content is shown in the upper right hand corner.
4. Baling Rate and Application Rate are shown in the middle of the screen. Application rate will read zero
with moisture only systems.
5. Volume of preservative used will be shown at the bottom of the screen will show accumulated pounds
of preservative used on the go. There will not be any information shown in the # Used section with a
moisture only unit.
6. The graph shows the moisture trend from the past 90 seconds in 3 second intervals.
7. The iPad button shown when using an iPad displays your connection signal with Bluetooth receiver.
Green
– iPad is connected, Yellow – iPad is connecting, Red – iPad not connected.
8. Press the MAIN MENU key to return to the opening screen.
1
8
3
2
5
6
7
4
Summary of Contents for 300RB
Page 2: ...2 intentionally blank ...