17
Job Records
After pushing the JOB RECORDS key in the Main Menu screen, the following screen will appear:
1. The job number will be displayed at the top center. The current job being viewed will always read "Job #:
0". Product used and average moisture content will be reset when the NEW JOB key is pressed. The job
records screen will store up to 300 jobs allowing access previous jobs by using the up and down arrows.
2. Scrolling through previous jobs is done by pressing the UP or Down keys.
3. The field name is located under the up arrow.
4. The accumulated information from the field will be displayed in the middle of the screen.
Every time the
NEW JOB key is pressed the accumulated pounds on auto and manual modes will be reset to zero.
After 300 jobs have been stored, the next time the NEW JOB key is pressed the system will start over with
job one and the old job will be replaced.
NOTE: Initial start-up requires pressing the New Job key in the Job Records screen in order for
Volume Used accumulation to be recorded. This only needs to be done once on initial start-up of
system and not every time the system is started for operation.
2
3
1
4
Summary of Contents for 300RB
Page 2: ...2 intentionally blank ...
