Propeller Owner's Manual
115N
INTRODUCTION
61-00-15
Page 1-5
Rev. 24 Dec/20
(9) The information in this manual revision supersedes data
in all previously published revisions of this manual.
(10) The airframe manufacturer’s manuals should be used in
addition to the information in this manual due to possible
special requirements for specific aircraft applications.
(11) If the propeller is equipped with an ice protection system
that uses components supplied by Hartzell Propeller
Inc., applicable instructions and technical information for
the components can be found in Hartzell Propeller Inc.
Ice Protection System Manual 180 (30-61-80).
(12) Propeller ice protection system components not
supplied by Hartzell Propeller Inc. are controlled by the
applicable TC or STC holder’s Instructions for Continued
Airworthiness (ICA).
(13) Approved corrosion protection followed by approved
paint must be applied to all aluminum blades.
(a) For information about the application of corrosion
protection and paint, refer to the Maintenance
Practices chapter of this manual. Operation of
blades without the specified coatings and finishes,
i.e., “polished blades”, is not permitted.
