MAINTENANCE PRACTICES
61-00-15
Page 6-16
Rev. 24 Dec/20
Propeller Owner's Manual
115N
B. Application Procedure
(1) Remove the spinner dome in accordance with the
Installation and Removal chapter of this manual.
CAUTION:
DO NOT APPLY CORROSION INHIBITOR
CM352 ONTO ICE PROTECTION SYSTEM
COMPONENTS (TERMINAL STRIPS,
BOOTS, HARNESSES, ETC.).
(2) Spray the corrosion inhibitor CM352 into a cup or
container, then use a soft bristled brush to apply the
corrosion inhibitor CM352 to the bolt heads, spring pins,
and bolt wells of the counterweight. Refer to Figure 6-5.
(a) Use caution when applying the corrosion inhibitor
CM352 around ice protection system components
(terminal strips, boots, harnesses, etc.).
(b) Make sure the bolt heads, spring pins, and bolt wells
are completely covered by the corrosion inhibitor
CM352.
(c) Optionally, corrosion inhibitor CM352 can be applied
to all exposed surfaces of the counterweight.
(3) Let the corrosion inhibitor CM352 cure for a minimum of
three hours before flight.
