Propeller Owner's Manual
115N
INSTALLATION AND REMOVAL
61-00-15
Page 3-57
Rev. 24 Dec/20
CAUTION:
IN THE FOLLOWING STEP, TIGHTEN
EACH SCREW BEFORE INSTALLING
THE NEXT SCREW.
(c) Working from the screw(s) previously installed at
the centerline toward the blade cutouts, install the
remaining screws.
1 Tighten each screw until snug, then turn an
additional 1/8 rotation to achieve an approximate
torque value of 20-30 In-Lbs. (2.3-3.3 N•m)
before installing the next screw.
(5) If the spinner loosens in service, add one or more layers
of UHMW tape to the cylinder until the spinner
fits snugly.
