Harris XL-185P, Pairing Manuals

Page: 3 / 13

G1 SCBA Radio Pairing Guide | Harris
Rev. 5-23-2019
Page 3 of 13
Step 9. The Personality will load into RPM2 in a new tab.
•
Save this Personality to the local computer (to write to other radios
later) by opening the “File” menu, and choosing “Save as…”
• Use the “Save” Icon (or the File menu and “Save” item) to save your
changes to the personality.
Step 10. (A) Click on the Personality’s “ Options ” Section to expand it.
(B) Choose the “
Audio Settings
” item.
Step 11. Under “ Audio Settings ” > “ Audio Menu Settings ” and:
(A) Check “ Speaker ”
(B) “ Noise Cancellation ” OFF (unchecked)
In the “ PTT Options ” of the same “ Audio Menu Settings ” section:
(C) Check “
PTT”
(D) Select “
Accessory Only
”
If the Harris radio is equipped with a Harris FSM Speaker , the Rx audio will
always be routed to BOTH the Harris FSM speaker AND the MSA G1 lapel
speaker . If desired, the firefighter can turn off the G1 Lapel Speaker (in
order to only play audio through the FSM speaker) by depressing the G1
Lapel Speaker’s button for 3 seconds.
If the Harris radio is
NOT equipped with a Harris FSM speaker
, the audio
will not play through the radio speaker if the G1 Lapel Speaker is turned
off; The G1 Lapel Speaker should be left ON in this situation.
Step 12. Scroll down to “ Bluetooth Microphone ” options and:
Harris recommended settings are:
(A) Enable (check) “
ALC
”
(B) “ ALC Max Gain ” can be left at “ 6 ” (dB)
(C) Set “ Mic Gain ” to “ 8 ” (dB)
Consult your Harris radio technician before making adjustments to the
recommended settings.