G1 SCBA Radio Pairing Guide |
Harris
Rev. 5-23-2019
Page
9
of
13
If you left the Bluetooth Settings screen (described in Step 3), Discovery is
turned OFF, and you will see a message popup like this.
Accepting the paring request sent from the SCBA will not be successful.
a)
Repeat step 3, 4, and 5.
Step 6.
When the Passkey Is presented on the radio:
Press the softkey for “ACCEPT”.
The Pairing Complete message will appear:
Press the softkey for “OK”.
The G1 SCBA & Harris Radio is now paired and ready for use.
•
After a successful pairing, if the regulator is shut off, the G1 SCBA will not remain
connected to the radio, and the radio is available for non-Bluetooth use.
•
The G1 SCBA will automatically re-connect to the radio when the end user turns on
the G1 regulator & breathes.
If you encouter difficulty pairing the radio:
•
Clear the pair information stored on the radio, as described in the “Clearing SCBA Pairing Info from the Harris
XL-
185P | XL-200P Radio” section in the pages hereafter.
•
For good measure clear the pairing information on the SCBA, as described in the “Clearing Radio Pair Info from
the G1 SCBA” section in the pages hereafter.
•
Repeat the “Pairing a G1 SCBA and Harris XL-185P | XL-200P Radio” procedure above
.
