Harris Platinum HT EL 2000LS, Technical Manual

Page: 17 / 90

Power Output 200 W
Measured at output of optional notch diplexer.
RF Output:
Impedance
50 Ohms
Connector Type N, Female
Audio Inputs:
1. Monaural
Level
0 to +16 dBm, 25 kHz deviation
Impedance 600 Ohms balanced
Response 0.5 dB, 30 Hz-15 kHz
Pre-emphasis Flat / 50uS / 75uS, selectable
2. Subcarrier (2 inputs)
Level
1 volt RMS, adjustable.
Impedance 75 Ohms, unbalanced
Response 0.5 dB, 20 kHz-110 kHz.
3. Wideband (composite)
Level
1 volt RMS nominal for 75 kHz deviation
Impedance 75 Ohms, unbalanced
Response 0.1 dB, 50 Hz to 50 kHz
0.5 dB, 50 kHz to 110 kHz
Monaural Performance:
Frequency Response
0.5 dB, 30 Hz to 15 kHz
Relative to standard 75S or 50S pre-emphasis curve.
Harmonic Distortion 0.2% or less
Measured at 25 kHz deviation, 30 Hz to 15 kHz after de-emphasis.
FM Signal-to-Noise 60 dB RMS or better
Relative to 25 kHz deviation.
AM Signal-to-Noise 55 dB RMS or better
Relative to 100% amplitude modulation.
AM Synchronous Noise 40 dB RMS or better
Relative to 100% amplitude modulation, measured before optional diplexer.
Wideband Composite Performance: (At 75kHz deviation)
Harmonic Distortion 0.25% or less, 50 Hz to 15 kHz
0.75% or less, 15 kHz to 50 kHz
Distortion (IMD) 0.5% or less
SMPTE 4:1 test signal.
FM Signal-to-Noise 70 dB RMS or better
Measured after de-emphasis.
AM Signal-to-Noise 55 dB RMS or better
Relative to 100% amplitude modulation.
AM Synchronous Noise 40 dB RMS or better
Relative to 100% amplitude modulation.
Stereo Separation 45 dB or better, 50 Hz to 15 kHz
Equivalent mode (uncompanded).
Crosstalk 50 dB or better
Stereo or Main channel into SAP.
Mechanical, Environment, Power
Physical Dimensions:
Table 1-1. Specifications
Continued
Section I - Introduction/Specifications
888-2457-001 1-5
WARNING: Disconnect primary power prior to servicing.