Harris InfoCaster R1000, Hardware Installation Manual

Page: 56 / 68

36 Chapter 3 | Maintenance
InfoCaster Rackmount Hardware Installation Manual
Prevent Damage and Malfunction
Read and observe all instructions in this section to keep your system working safely and effectively.
Hardware
Do NOT modify the hardware. Your system is delivered with all the necessary
hardware and software already installed. You should not have to open the
system case. However, if the system case is damaged, please call Inscriber
Technical Support and follow their direct instructions to open the top of the
unit and verify that all components are still properly seated and connected.
Installing additional hardware or modifying the hardware in any way can
compromise the uninterrupted operation of your system.
Software
Do NOT add software. Your system is a closed system. Do not install any
additional third party software. Additional software can create undesired effects
and possibly introduce viruses to the system. If you install additional third party
software your system may no longer run satisfactorily.
Monitor Refresh
Rate
The factory sets the system graphical resolution to 1152 X 864 pixels with a
vertical refresh rate of 75Hz. If your computer monitor is an older model that
does not support a refresh rate of 75Hz, your display could be unusable and
you could damage your hardware. You need to change the system refresh rate to
a value that your monitor does support.