Harris InfoCaster R1000, Hardware Installation Manual

Page: 31 / 68

11 Chapter 2 | Installation and Setup
InfoCaster Rackmount Hardware Installation Manual
Chassis Rack Mount
The InfoCaster Rackmount system must be mounted in an area where there is unrestricted air movement. For
maximum efficiency and reliability, the InfoCaster system should be operated in an ambient temperature
between 40° and 95°F (5° to 35°C) non-condensing.
Structural
Support
Along with the rack mounting ears included in the packing box, InfoCaster
Rackmount systems require additional structural support.
Inscriber does not provide rack mounting slides as a standard part of the
system accessories. You can order slides for your InfoCaster Rackmount chassis
from Inscriber.
Inscriber has tested and approved the Chassis Trak
®
Model C-300 rack
mounting slides from General Devices. These slides are available in various
lengths to meet your rack mounting requirements, and are designed to support
the weight of a fully configured InfoCaster system. Other manufacturers can
provide equivalent rack slides, but these rack slides are not tested for use with
Inscriber systems.
Sources for Rack Mounting Slides
Inscriber tested and approved:
• General Devices – http://generaldevices.thomasnet.com/Category/
solid-bearing-slides
Additional sources of rack mounting slides:
• Accuride – http://www.accuride.com/index2.php
• Above Board Electronics – http://www.aboveboardelectronics.com/
accuride/rm_accessories.html
• Holly – http://www.hollyintl.com/rackmount.htm
• Surplus Sales – www.surplussales.com/Cab-RacksHardware/
ChassisSlides.html