Harris InfoCaster R1000, Hardware Installation Manual

Page: 32 / 68

12 Chapter 2 | Installation and Setup
InfoCaster Rackmount Hardware Installation Manual
Chassis Slides
Installation
The following installation procedure is for the General Devices slide assembly.
If you purchase another brand of chassis slides, follow the instructions
provided with that product.
Before you install the chassis in the rack, make sure that the chassis cover is in
place, and the slides are attached to both the chassis and the rack.
Before installing the chassis slides:
1 Ensure that the chassis covers are in place.
2 Unplug the AC power cord(s).
3 Remove all external devices and connectors.
Installing the Slides
Included in the shipping package are a pair of slide assemblies and assocciated
hardware. Each slide assembly includes an inner, intermediate, and outer slide.
The assemblies are identical, and can be installed on either side of the chassis.
1 Lift the extension lock lever to release the inner slide from its locked
position and pull the inner slide out from the assembly.
Figure 2-1. Chassis Slide Assembly
Warning
To avoid personal injury and
property damage, please adhere
to all safety steps.
Inner Slide
(attach to chassis)
Outer Slide
(installed on rack)
Extension Lock
Intermediate Slide