Harris InfoCaster R1000, Hardware Installation Manual

Page: 43 / 68

23 Chapter 2 | Installation and Setup
InfoCaster Rackmount Hardware Installation Manual
12 If you are setting up Edit & Playback VGA output:
a Select your desktop area from the drop-down list.
b Right-click on monitor 2 and select Extend Main onto monitor.
c Click Apply.
13 Click on Done and close the Catalyst Control Center and the Display
Properties dialog.
Set Up Edit & Playback Without Catalyst Control Center
If you have just the ATI drivers and no Catalyst Control Center, follow these
instructions to configure Edit & Playback output.
1 Turn on the second monitor.
2 Right-click on the Windows desktop.
3 Select Properties to open the Display Properties dialog.
4 Switch to the Settings tab.
Figure 2-8. Display Properties Settings Tab