Harris InfoCaster R1000, Hardware Installation Manual

Page: 51 / 68

31 Chapter 2 | Installation and Setup
InfoCaster Rackmount Hardware Installation Manual
Audio Setup Options
Enable Live Audio
Input
If you have audio/video capture cards installed on your system, select the
Enable Live Audio/Video Input checkbox on the Video/Audio Standard tab in
the InfoCaster Configuration Utility. If you select this option, InfoCaster
enables you to use audio input from the cards within your Live Video regions.
If the capture card you wish to use is a PCI-100 or XD-200 card, select the
appropriate radio button. Otherwise, select the Third-Party Card radio button
and select the video standard from the drop-down list.
Enable Audio
Output
In order for your InfoCaster system to output audio, select the Enable Audio
Output checkbox on the Video/Audio Standard tab. When selected, InfoCaster
uses the default audio device currently set up within Windows.
Configure the
Audio I/O
Use the Sounds and Audio Devices control panel to change the Windows
default audio device and to configure your audio settings.
1 Select Start > Settings > Control Panel > Sounds and Audio Devices.
2 Select the Audio tab.
3 In the Sound playback section, select the audio card from the Default
device drop-down list.
4 Click the Advanced button and select the Speakers tab in the Audio
Properties window.
5 Select a speaker setup from the drop-down list.
The audio ports function changes depending on the channel configuration.
The following table lists the function of the audio ports in all configurations.
Table 2-4. Audio Channel Configuration
Port Color
2-Channel
(Stereo)
4-Channel
(Quadrophonic)
6-Channel
(5.1 Surround)
8-Channel
(7.1 Surround)
Light Blue Line In Line In Line In Line In
Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Mic In Mic In Mic In Mic In
Grey — — — Side Speaker Out
Black — Rear Speaker Out Rear Speaker Out Rear Speaker Out
Orange — — Center/Subwoofer Center/Subwoofer