Harris ACS-163, Installation & Operation Manual

Page: 171 / 178

7 – Specifications ACS-160 Series & STL-160 Series T1 Multiplexer Installation & Operation
Version 2.11, August 2011
Harris Corporation 7-5
Intraplex Products
P
h
y
si
ca
l
a
n
d E
n
v
ir
o
n
m
e
n
ta
l
Temperature 0× - 50×C operating
Humidity 10% - 90% non-condensing
Height 5.25 inches (3RU)
1.75 inches (1RU)
Width Compatible with EIA standard RS-310 19-inch equipment racks
Depth 14.75 inches from mounting plane, not including user-supplied connectors
Front Projection 0.75 inches from mounting plane, with front door closed
Weight 3RU: 11 lb. (5 kg) approximate, with no channel modules installed; 15 lb.
(6.8 kg) typical when fully loaded
1RU: 10 lb. (4.5 kg) approximate, with no channel modules installed; 11
lb. (5 kg) typical when fully loaded
Regulatory Compliance CE-compliant
FCC Part 15, Part 68
UL 1950
CS-03
CTR12, CTR13
Specifications are subject to change without notice.
7.2 Notice of FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when this equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his/her own expense.
Warning! This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.