GB
49
Option 1: Air supplied through the floor
Option 2: Air supplied through the wall
1. Applying Compriband
• Tilt the stove.
1. Fitting air pipe
• Cut the air pipe to length;
• Put the air pipe into the
hole in the wall.
• Carry out point 3 of the
installation instructions (3.
Positioning the stove).
3. Fitting U-rubber
• Place U-rubber around
the hole.
5. Applying Compriband
• Affix Compriband on the
underside of the base, in a
wide circle around the
air hole.
• Tape up remaining roll of
Compriband for future use.
2. Applying Compriband
• Affix Compriband on the
underside of the base, in
a wide circle around the
air hole.
• Tape up remaining roll of
Compriband for future use.
2. Removing break-out plate
• Remove the break-out plate
at the back of the base.
4. Applying Compriband
• Tilt the stove.
6. Connecting air pipe
• Pull out the air pipe so that it
reaches into the hole in
the base.
• Push the U-rubber inwards
against the air pipe so that
it seals off the gap.
