Spectrum
20
3. Using both hands to grip the screws, gently pull out the module from the chassis, as shown in the
following figure.
2
3
Deleting an I/O module from SystemManager
Once you have removed the module from the chassis, delete the corresponding I/O module from
SystemManager.
1. Click the
Diagnostics
tab to display the
Diagnostics
page.
2. From the
Device Maintenance
section in the left-hand column, click the
Remove Device
icon to
display the
Remove Device
page.
3. Scroll to the
I/O Modules
section of the page and locate the module you wish to remove.
4. From the
Select
column, check the box for the I/O module you wish to remove, and then click
Remove
.
A confirmation message appears.
5. Click
OK
.
After a brief pause, a message appears indicating that the device has been removed (it has also been
removed from the
System Diagram
).
6. Click
OK
to return to the
Remove Device
page.
Installing the replacement module
Secure the module to the chassis using a cross-head screwdriver.
1. Unpack the module.
2. Grasp the module handle and push firmly into the slot. Ensure the module is fully inserted by pressing
on the connectors with the palm of your hand.
3. Tighten the two lock screws on the rear panel of the module to secure it to the chassis.
4. From the
Configuration
tab of SystemManager, view the
System Diagram
page and verify that the
new module appears.
