Harman Martin MAC Aura PXL User Manual Download Page 4 | Manualshive

Page: 4 / 46

background image

4

MAC Aura PXL User Guide

Introduction

Warning! Before installing, operating or servicing the MAC Aura PXL, read the latest version of the
product’s Safety and Installation Manual, paying particular attention to the Safety Precautions
section. The Safety and Installation Manual is supplied with the fixture. The latest version is also
available for download from the MAC Aura PXL area of the Martin website at www.martin.com.

This User Guide is a supplement to the Installation and Safety Manual that is supplied with the MAC Aura
PXL. Both these documents are available for download from the MAC Aura PXL area of the Martin® website
at www.martin.com. This User Guide contains information that is mainly of interest for lighting designers and
operators, whereas the Safety and Installation Manual contains important information for all users,
especially installers and technicians.

We recommend that you check the Martin website regularly for updated documentation, because we
publish revised versions each time we can improve the quality of the information we provide and each time
we release new firmware with changes or new features. Each time we revise this guide we list any important
changes on page 2 so that you can keep track of updates.

Operating the fixture

Before applying power to or operating the MAC Aura PXL:

• Read the ‘Safety Information’ section of the fixture’s Safety and Installation Manual.

• Check that the installation is safe and secure.

• Check that the base is fastened securely so that the torque reaction when the head moves will not cause

the base to move.

• Check that the head tilt lock is released.

• Be prepared for the fixture to light up suddenly. Check that no-one is looking at the fixture from close

range.

• Be prepared for the head to move suddenly. Check that there will be no risk of collision with persons or

objects.

The MAC Aura PXL does not have an On/Off switch. To apply power to the fixture, apply power to the power
input cable.

«
...
2
3
4
5
6
...
»

Summary of Contents for Martin MAC Aura PXL















































Reviews:

No comments

Related manuals for Martin MAC Aura PXL

Brand: MacDon Pages: 17

Brand: Olympus Pages: 50

Brand: VAHVA Pages: 19

D-IMager EKL3104

Brand: Panasonic Pages: 13

Brand: Labokey Pages: 5

Brand: E-Z Trail Pages: 8

Brand: B&K Pages: 10

FreeStyle Comfort

Brand: CAIRE Pages: 33

Brand: p-light Pages: 28

Brand: Ognibene Pages: 28

Brand: Hameg Pages: 24

Brand: Vaisala Pages: 118

Brand: Idmed Pages: 2

Brand: MagCore Pages: 80

Brand: MagCore Pages: 80

Brand: Madsen Pages: 206

Brand: Waters Pages: 250

Brand: Waters Pages: 141

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands