Adjusting settings via DMX
21
4. Send a ‘Store ...’ command for the effect on the Fixture control/settings channel and hold for 5 seconds
to activate. Calibration offsets are now stored in memory and normal DMX control is restored.
Calibration offsets that are stored in memory are not affected by powering the fixture off and on or by
updating the fixture software.
You can reset all calibration offsets to their default values by sending a DMX value on the Fixture
control/settings channel. You must hold the value for 5 seconds. The fixture will return to factory default
calibration values. If you have overwritten the factory default values by applying a CALIBRATION
→
SAVE
DEFAULTS command in the SERVICE menu, the fixture will return to the last default calibration values that
were saved).
Summary of Contents for Martin MAC Aura PXL
Page 1: ...MAC Aura PXL User Guide ...
Page 46: ...www martin com ...
