Video and Audio Commands (Direct Control)
Reference Manual - JPK-1300
40
No. Command
Function Description
Example
1
get auto switch mode
Variables:
<state> = enable | disable
Default Value:
enable
Get auto switch mode state for video
output
Command:
get auto switch mode
Return
:
get auto switch mode enable
2
set auto switch
mode:<state>
Variables:
<state> = enable | disable
Default Value:
enable
Set auto switch mode state for video
output
Command:
set auto switch mode:disable
Return
:
set auto switch mode manual
3
get switch CO
Default Value:
default auto switch input
video priority:
HDMI1 > HDMI2 > USB-C
Get audio/video output are
switched from which input
Command:
get switch CO
Possible response message include:
▪
get switch audio and video from hdmi 1 for output
▪
get switch audio and video from no usb-c for output
▪
get switch audio from usb-c for output
▪
get switch audio from hdmi-arc for output
4
set switch CI<input
channel>
Variables:
<input channel>=
{
1=hdmi1,
2=hdmi2,
3=usb-c
}
Default Value:
default auto switch video
priority:
HDMI1 > HDMI2 > USB-C
(If all of them have no
active video in)
Set switch audio and/or video input
to the output port.
Possible command send:
▪
set switch CI1
▪
set switch CI3
▪
set switch CI3
▪
set switch CI4
Possible response message include:
▪
set switch audio and video from hdmi 1 for output
▪
set switch audio and video from usb-c for output
▪
set switch audio from usb-c for output
▪
invalid switch
5
get vidin res
Variables:
<resolution> = <H> x <V>
<i |p>,<Rate><Specific
Info>
Default Value:
“ “ (blank for no active
input signal)
Get active input video resolution
Command:
get vidin res
Possible response message include:
▪
get 1920x1080p,60
▪
get no active video
▪
get unkonw format
6
get vidin hdcp
Variables:
<hdcp_compliance>= on
| off
Default Value:
on
Get hdcp mode for device input
Command:
get vidin hdcp
Return
:
get hdcp compliance on for device input
7
set vidin hdcp:<hdcp_
compliance>
Variables:
<hdcp_compliance>= on
| off
Default Value:
on
Set hdcp mode for device input
Command:
set vidin hdcp:off
Return
:
set hdcp compliance off for device input