Reference Manual - JPK-1300
25
3.
Relay Settings:
(1)
Screen Up/Down: Click “Up” to trigger Relay 1 open/closed; Click “Down” to trigger Relay 2 open/closed.
(2)
Relay Normal State: Click to select the Relay state (Normally Open/Normally Closed).
(3)
Relay Port Assignment: Click to select Screen Up/Screen Down for Relay 1 and Relay 2 respectively.
(4)
Relay Mode: Click to select Momentary (To be open/closed briefly) or Latch (To be open/closed for a long time).
(5)
Momentary Time (s): Click the up/down arrow to set the time for Momentary (Time range: 0~120s).
4.
System Control:
(1)
System: Click “ON” to power on the system; Click “OFF” to power off the system.
(2)
Display: Click “ON” to execute the CEC/RS-232/IR Power On or Screen Up action; Click “OFF” to execute the CEC/RS-232/IR Power Off
or Screen Down action.
(3)
Auto Display On/Off: Click to select Enable/Disable. When “Enable” is selected, the system will detect whether there is video signal,
if there is no video signal, it will execute the CEC/Serial/IR Power Off or Screen Down action.
(4)
Set the Delay time for the CEC/RS-232/IR Power Off or Screen Down action to be executed after there is no active video.
(5)
Respectively set the Manual Power On/Off and the Delay Time for the CEC/Serial/IR/Relay.
