Network Commands
Reference Manual - JPK-1300
37
No. Command
Function Description
Example
1
get friendly
Variables:
friendly name = maxmum
20 digitial length
Default Value:
model with last 7 digits of
serial # in Capital Letters
(e.g. JPK-1300-0050425)
Get device’s IP hostname
>get friendly<CR>
--Current device friendly name: JPK-1300-0050425
>
2
set friendly
Variables:
friendly name = maxmum
20 digitial length
Default Value:
model with last 7 digits of
serial # in Capital Letters
(e.g. JPK-1300-0050425)
Set device’s IP hostname
>set friendly<CR>
Please input friendly name:
Old friendlyname: JPK-1300-0050425 New
friendlyname: 111<CR>
Would you like to save this setting(Y/N) y<CR>
Setting is ok , you should reboot that make it
effective
>
3
get ip
Variables:
host name = maxmum 20
digital lenght
ip type = dhcp | static ip
netmask
gateway
Default Value:
IP Address Mode: DHCP IP
Address(for static
mode):192.168.1.2
Netmask(for static
mode):255.255.255.0
Gateway(for static
mode):192.168.1.1
MAC Address: as set in
factory
Show the IP configuration of
this device.
>get ip<CR>
IP Settings
------------------------------------------
HostName:
JPK-1300-0050425
Type:
Static
IP Address:
192.168.1.3
Subnet Mask:
255.255.255.0
Gateway IP:
0.0.0.0
MAC Address:
00:60:9f:a4:46:f3
>
4
set ip
Variables:
host name = maxmum 20
digital lenght
ip type = dhcp | static ip
netmask
gateway
Default Value:
IP Address Mode: DHCP IP
Address(for static
mode):192.168.1.2
Netmask(for static
mode):255.255.255.0
Gateway(for static
mode):192.168.1.1
MAC Address: as set in
factory
Setup the IP configuration of
this device.
>set ip<CR>
--Enter New Values or just hit Enter to keep current
settings--
Enter Host Name: JPK-1300-0050425 -> ROOM1<CR>
Enter IP type. Type D for DHCP, or S for Static IP and then
Enter: DHCP ->s<CR>
Enter IP Address: 192.168.1.2 ->192.168.1.3<CR>
Enter Subnet Mask: 255.255.255.0 -><CR> Enter
Gateway IP: 192.168.1.1 ->0.0.0.0<CR>
--You have entered:
Host Name ROOM1
Type
Static IP
IP Address 192.168.1.3
Subnet Mask 255.255.255.0
Gateway IP 0.0.0.0
Is this correct? Type Y or N and Enter -> Y<CR> Settings
written. Device must be rebooted to enable new settings.
>
