Hardware Reference Manual
66
APPENDIX A: Factory Default Configuration
Factory Default Configuration
Hardware Default Setting
Switcher
Setting
USB Mode Switcher
TX - USB Host,
RX - USB Device
4-Pin DIP Switcher
0000 (O-OFF,1-ON)
Software Default Parameters
Parameter
Value
MAC Address
As set in factory
Serial Number
As set in factory
Ethernet Mode
Auto (i.e., speed, duplex, both, auto)
IP Addressing Mode
DHCP
IP Address (for static mode)
192.168.1.2
Netmask (for static mode)
255.255.255.0
Gateway (for static mode)
192.168.1.1
DNS 1 (for static mode)
8.8.8.8
DNS 2 (for static mode)
8.8.8.8
DNS Domain
amx.com
Hostname
Model (e.g., DX-RX-4K60); after factory reset, model with
last 7 digits of serial#
Central Controller
Connection Mode
NDP
Central Controller
URL (for TCP and UDP URL
modes)
" " (blank)
Central Controller
Connection Port Number (for TCP
and UDP modes)
1319
Friendly-Name
" " (blank)
NOTE:
If the Friendly Name is non-blank, both Friendly
Name and Location are concatenated to make NDPSTRING2,
otherwise NDPSTRING2 is generated from the unit’s serial
number.
Location
" " (blank)
Stored MAC Address of
Central Controller
(for NDP
binding)
00:00:00:00:00:00
ICSP Device Number
0 (0= receive dynamic device number form
Central
Controller
)
System Number
0
Telnet Port
23 (A value of 0 disable the Telnet server. Telnet is enabled
by default)
SET BAUD
9600, N, 8,1
CTOF Time
5 (0.5 seconds)
CTON Time
5 (0.5 seconds)
CEC_DISP_AUTO
ON
CEC_SLEEP_TIMEOUT
2 minutes
Summary of Contents for AMX DXLINK DX-RX-4K60
Page 42: ...Hardware Reference Manual 38 ...