Citation 7.0 Owner’s Manual
Preliminary Draft
Page # 34
Enitre Contents Copyright ©1995 - Harman Kardon Inc.
Reset System
This option will completely erase all system settings, including user name, input names, speaker and screen
configurations, system and input level settings and more.
WARNING:
Once these settings are erased they may not be recovered; they will have to be reentered using
the installation steps outlined in this manual. It is highly advisable that you review all menu settings and record any
setup data using the summary sheets provided in Appendix #xx. Completing these sheets will provide a road map from
which to recreate installation settings.
To reset the
entire
system setup and all users settings and memories, proceed as follows:
1. Go to the “System Setup” status page menu by pressing the “System Setup” button. Press the button again to
activate the control system.
2. Using the “
Ð
“ button, move the on screen “
Î
“ pointer down the page so that it is next to the “Settings Reset” line.
(Figure #xx). Press “Select” to chose that option.
3. On the “Reset Settings” menu, press the “
Ð
“ button once to move the “
Î
“ pointer to the “Reset System” line (figure
#xx). Press “select” to choose this option.
4. A warning message will appear (Figure #xx) to remind you that the entire system will be reset and all existing
settings will be erased if you proceed to the next step.
5. To return to the previous menu without erasing the settings, press “Cancel”. If you wish to proceed, press “Select”.
6. After pressing “Select” to proceed, an instruction menu will appear. (Figure #xx) As the menu indicates, additional
steps need to be followed to complete the system reset.
7. Exit the menu system by pressing the “Exit/OK” button
three
times. Turn the 7.0 off using the remote or front panel
power buttons. Unplug the unit from the AC outlet.
8. After a few second pause, plug the AC back to an outlet. Turn the unit on again using a power switch. At this point
the unit will be returned to factory settings. Any items that were previously adjusted will need to be reset, reentered or
readjusted. To insure optimal operation, remember that speaker configurations, system output levels and source input
levels will need to be re-established.
