Citation 7.0 Owner’s Manual
Preliminary Draft
Page # 17
Enitre Contents Copyright ©1995 - Harman Kardon Inc.
22. L/R Stereo Subwoofer Outputs:
These jacks carry the audio to stereo subwoofers. Connect them to the amplifier
channels that power your subwoofers, or to the appropriate input connections of powered subwoofers. For proper
operation , the system must be set to direct signals to this output. See page #x for more information on Subwoofer
output selection.
Note: All audio output connections should be made to the matching input jacks on audio power amplifiers. DO
NOT connect any of the outputs of the Citation 7.0 directly to a speaker.
23. Calibration Microphone Jack:
Connect the special microphone shipped with your Citation 7.0 to this jack before
starting the “Auto Calibrate” set-up sequence. See page #x for more information on Auto calibrate.
24. Trigger 1:
This jack sends a control signal that will typically be used to activate automatic blinds or room light
dimmers. The signal is sent to this jack whenever the “dim” button is pressed on the remote control. See page #xx for
more information.
25. Trigger 2:
This jack sends a control signal that activates external control boxes, and it is typically used to control
projection television screens and theater type curtains. It may be programmed to raise or lower the screen based on
the selection of a particular input source. See page #xx for more information on screen control.
26. PWR Trigger:
This jack sends a control signal to activate external devices whenever the 7.0 is turned on. In most
applications a Citation audio power amplifier will be connected here, but it may also be used to control blinds, lights,
curtains or other items.
NOTE: Do not connect any of the trigger jacks directly to projection screens, audio amplifiers or blind
controllers without the use of a relay control box. Do not connect these jacks to any audio or video input connections.
Connections involving these jacks should be made by a trained dealer or installer.
27. IR IN:
This jack accepts signals from remote IR sensors. Using this jack it is possible to extend the unit’s built in
remote control sensor when it is hidden from direct view of the remote control. See page #xx for more information.
28. RS-485 Citation Control Port:
This RS-485 communications jack is an expansion port for future options such as
multi-room controllers and external multi channel digital audio decoders.
