Citation 7.0 Owner’s Manual
Preliminary Draft
Page # 16
Enitre Contents Copyright ©1995 - Harman Kardon Inc.
10.
Record Output A (“S” video):
This output jack carries the “S” signal from the source selected for routing to
“Record A” if an “S source is selected. Connect this jack to the “S” input of the VCR or display monitor which will be
monitoring this output. See page #x for more information on Recording.
11.
Record Output B (“S” video):
This video output jack carries the “S” signal from the source selected for routing to
“Record B” if an “S” video source is selected. Connect this jack to the “S” of the VCR or display monitor which will be
monitoring this output. See page #x for more information on Recording.
12.
Main Output 1 (“S video)
This video output jack carries the “S” video signal from a selected input “S” type video
source to an “S” video display device or monitor. Connect this jack to an “S” input on your monitor or projector. If you
wish to remove the on screen menus from this output, see page #x.
13. Main Output 2 (“S” video):
This video output jack caries the “S” signal from the selected “S” type input to a
second or auxiliary monitor. The on screen menu displays are always present on this feed.
14. Audio Input Connections:
These eight pair of audio jacks are used to connect the audio sources to the Citation
7.0. For connections of the audio that accompanies a video source, make certain that the audio and video sources are
connected to a jack with the same number. Note that the top line of audio input jacks have a white insert ring. They are
used to connect the signal for the left channel. The bottom row of jacks have a red insert ring. They are used to
connect the right audio signal.
15. Record Output A:
These jacks carry the audio for the source selected for routing to Record A. Connect them to
your audio or video recorder. See page #x for more information on recording.
16. Record Output B:
These jacks carry the audio for the source selected for routing to Record B. Connect them to
your audio or video recorder. See page #x fro more information on recording. This jack ma also be connected to the
input of a multi-room distribution system see page #x for more information on multi-room connections.
NOTE: Input sources will remain in their original format at the outputs. A video source will appear only at the
video output, and an “S” source will appear only at the “S” output. If a video source is selected, there will be no signal
at the “S output, or a video output for an “S” source.
17. L/R Front Outputs:
These jacks carry the audio output for the left and right front channel speakers. These jacks
should be connected to an input of your audio power amplifier.
18. Center Front Output:
This jack carries the audio for the center front channel. Connect it to an input of your audio
power amplifier.
19. Mono Sub Output:
This jack carries the audio for the mono Subwoofer. Connect it to an input of your audio power
amplifier or to the input connection of a powered Subwoofer.
20. L/R Surround Side Outputs:
These jacks carry the audio for the left and right side surround speakers. If you are
using conventional surround speakers, or Home THX® speakers other than Citation or Fosgate*Audionics Dual Drive
Models, connect these jacks to the audio amplifier used to power your surround channels. If you are using Citation or
Fosgate*Audionics Dual Drive Dipoles, connect these jacks to the amplifier channels that power the front sections of
the appropriate left and right speakers. Make certain that the Surround Speaker menu is properly configured to reflect
the type of speaker used., See page #x for more information.
21. L/R Surround Back Outputs:
These jacks carry the audio fro the “back” section of Citation or Fosgate*Audionics
Dual Drive Dipoles. Connect these jacks to the amplifier channels that power the rear sections of the appropriate left
and right speakers. Make certain that the Surround Speaker menu is properly configured to reflect the type of speaker
used., See page #xx for more information.