![background image](http://html1.mh-extra.com/html/harken/tensioner-ct0/tensioner-ct0_user-and-maintenance-manual_597531010.webp)
Rev.0
–
19/03/2021
10
11.
Rope diameter
WARNING!
For safety and correct performances, use ropes of the diameters indicated below.
NOTE!
For safety and for correct performance of the Tensioner use only rope of the best
brands.
The rope diameter when is not stretched cannot exceed the 5% of the nominal
value specified at the Captive order.
Two configurations of Tensioner CT0 are available in function of the rope diameter:
Ø10-12mm and Ø14-16mm.
Every Tensioner is assembled considering the specific rope diameter defined at the order.
The parts that change between the two configurations are the hubs and the lipped rings:
Tensioner description
Ø rope
Hub code
Lipped ring code
min
max
in
mm
in
mm
Tensioner CT0 10-12
0.39
10
0.47
12
S734630052
S737290080
Tensioner CT0 16-18
0.55
14
0.63
16
S734620052
S737300080
Summary of Contents for Tensioner CT0
