9
STEP 3
CAUTION
: This unit is HEAVY! Do not
attempt this step without assistance!
Locate: Smoker Stack (A), four M6x12 screws (AA)
Tools needed: Philips head screwdriver
Procedure:
• With the assistance of a helper, stand the unit
upright on its legs on a firm and level surface.
(Make sure that the legs are attached). Place
the Upper (P) and Lower (Q) Doors back onto
the hinges of the Smoker Body (G) and close
the doors. Position the square Smoke Stack (A)
with control arm to the left as shown. Using four
screws (AA), attach square Smoke Stack (A) to
the top of Smoker Body (G). Securely tighten with
a Phillips screwdriver.
STEP 4
Locate: Two Support Brackets (K),
eight M6x12 screws (AA)
Tools needed: Philips head screwdriver
Procedure:
• Attach Support Bracket (K) to Smoker Body
(G) using four M6x12 screws (AA). Repeat for
remaining Bracket (K).
STEP 5
Locate: Three Door Latches(J),
six M4x10 screws(BB)
Tools needed: Philips head screwdriver
Procedure:
• Attach the three Door Latches (J) to Smoker
Body (G) using two M4x10 screws (BB).
G
A
AA
K
G
AA
J
BB
G
