8
C. ASSEMBLY INSTRUCTIONS
STEP 1
Locate: Rear Leg-Right (H), Rear Leg-Left (T), Front
Leg-Right (M), Front Leg-Left (N), Smoker
Body(G), twelve M6x12 screws (AA)
Note: The doors are attached to the Smoker Body.
Tools needed: Philips head screwdriver
Procedure:
• CAUTION: Remove the Upper (P) and Lower (Q)
Doors before beginning assembly.
• Attach Rear Leg-Right (H) & Rear Leg-Left (T)&
Front Leg-Right (M) & Front Leg-Left (N) to the
Smoker Body (G) using twelve M6x12 screws (AA).
STEP 2
Locate: Burner & Control Unit (L),
six M6x12 screws (AA)
Tools needed: Philips head screwdriver
Procedure:
• Turn the Burner & Control Unit (L) upside down
and place it on the bottom of the Smoker Body
(G). Align the four bottom mounting holes on the
Burner & Control Unit (L) with the holes on the
Smoker Body (G). Secure with four M6x12 screws
(AA). Tighten screws.
Note: The control knob should be on the same side as
the door.
• Align the mounting holes on the side of the
control panel with the front legs and secure with
two M6x12 screws (AA). Tighten screws.
WARNING
DO NOT HANDLE SMOKER BY THE CROSS BAR ON SMOKER CABINET.
DO NOT LIFT OR MOVE USING THIS CROSS BAR.
T
G
H
N
M
AA
G
AA
L
N
AA
M