15
Please note that the hose is already fitted to the
valve on the underside of the control panel of the
smoker. You do not have to adjust this connection
but should leak test this once the hose and
regulator are connected to the gas cylinder.
DO NOT DISCONNECT HOSE FROM VALVE.
FOR STORAGE AND CYLINDER EXCHANGE,
DISCONNECT THE CYLINDER ONLY.
DO NOT DISCONNECT HOSE FROM APPLIANCE.
— If you need a replacement hose and regulator or have any queries on the gas system, please call
our Customer Service line on 1300 799 787.
LEAK TESTING
Open the gas control valve on the cylinder. Check for leaks by brushing a solution 1/2 water and 1/2 soap over
all gas system joints, including all valve connections, hose connections and regulator connections. DO NOT
USE AN OPEN FLAME to test for leaks at anytime. If bubbles form over any of the joints, there is a leak. Turn
off the gas supply and re-tighten all joints. If bubbles form again, do not use the smoker. Please contact
customer service line on 1300 799 787. Check for leaks annually or whenever the gas cylinder is refilled.
