12
STEP 11
Locate: Six Cooking Grates (E)
Tools needed: None
Procedure:
• Slide the Cooking Grates (E) onto the Grate
Supports (F) inside the Smoker Body (G).
STEP 12
Locate: Temperature Gauge (C)
Tools needed: Wrench or Plier
Procedure:
• First, Remove the pre-assembled nut from the
Temperature Gauge (C). Insert the probe of the
Temperature Gauge through hole of the Upper
Door (P) from the outside. Secure with nut
from inside panel. Tighten with wrench. Do not
overtighten.
STEP 13
Locate: Grease Cup (I)
Tools needed: None
Procedure:
• Slide the Grease Cup (I) onto the Grease Cup
Support of the Smoker Body (G) bottom.
• Repeat on the other side.
STEP 14
Locate: Back Support Pipe (U), two M6x65 screws
(FF), two washers (EE), two nuts (DD)
Tools needed: Philips head screwdriver and
wrench or plier
Procedure:
• Attach the Back Support Pipe (U) to Rear Legs
using two M6x65 screws (FF), two washers (EE)
and two nuts (DD).
G
F
E
C
P
I
G
H
U
T
FF
DD
EE
