Configuration of the eCB1 LR MP+ (metering
point)
Open the Webinterface
Open the Webinterface of the eCB1 MP+ (metering point at the house connection) by
entering its IP address in your webbrowser.
Prior to that, it has to be integrated into the network of the house. Then through the
interface of the router, you can find the IP address of all eCB1, including this one.
If therer is no other configured eCB1 in your Network you can contact the eCB1 MP+ with
http://ecb1.local
for first configuration.
If the Domane Name System does not work you can find the IP adress through the
Webinterface of your router.
The following page should open up:
Please click “
proceed
” to get to the following section:
Configuration instructions
eCB1
smartmeter
Version: 1.2.3
8
